Cu3er not displaying

[val1723]

Hello,

I would love to use this application on my website, but when enable it only the logo displays and nothing loads. (downloaded from your most recent link, so I assume it's the latest version)

I have images in all the articles, the module is certainly enabled and I turned off any other flash that could be causing conflict simply to test what was happening.

I turned on the "debug" feature to see if I noticed anything wrong, but I didn't.

I have temporarily disabled the application since my site is live, but I would love to have it up and running.

Could you please orient me as to what could be wrong and how to fix it?

Thank you!

[david]

Hi,

Please make sure the images folder is writable.

Please let me know the result.

Regards,
David

[val1723]

Hi David,

Thank you for your response. The images folder is writable. Any ideas?

Perhaps there is something I am missing. I have my articles setup with images inside, and I assumed Cu3er pulls the first image in the article for the display. Is this correct? Or is there anything specific that I need to do with the images that I missed?

[david]

I have my articles setup with images inside, and I assumed Cu3er pulls the first image in the article for the display. Is this correct?

Yes that's correct!

I just created a section called "Slideshow" and a category called "Slideshow" - you actually take your images and place them right into the article - the developer makes it so easy for us there! Just select that section and category in the module setting and you'll display those articles where you put your images.You can also write text below your image and have that show up.

[shd68]

Hi

I have the same problem, it shows only the logo. made everything writeable, has no Apache locks, no _in the maps and images... still not showing the images.
I made a section and category and articles with images...
still not working...

Also the same problem with Peacemaker...
Maybe I doing something wrong.

Hopefully somebody can help...

[val1723]

Yes that's correct!

Then everything is setup correctly, and it still only displays an image.

I am using something else temporarily, but I would love to use cu3er. It is a great interface. Anything else I could check that might be preventing the correct display?

Thanks!

[xaman]

Hello,

I would love to use this application on my website, but when enable it only the logo displays and nothing loads. (downloaded from your most recent link, so I assume it's the latest version)

I have images in all the articles, the module is certainly enabled and I turned off any other flash that could be causing conflict simply to test what was happening.

I turned on the "debug" feature to see if I noticed anything wrong, but I didn't.

I have temporarily disabled the application since my site is live, but I would love to have it up and running.

Could you please orient me as to what could be wrong and how to fix it?

Thank you!

I have the same issue. Might be related to peermissions, hope the devs can help us with this, the module looks really great.